product manual UTP shielded jumper ID: L5F716BW1.0P Cat5e patch cord (FTP) ● Product Standard: TYF / EIA / TLA-568A, TYF / EIA / TLA-568B, through FLUKE test channel and permanent link test. ● Product standard: TYF / EIA / TLA-568A, TYF / EIA / TLA-568B, having reached the standard of FLUKE and passed the information link testing. UTP shielded jumper ID: L5F716BW1.0P Cat5e patch cord (FTP)

Product Features: Ø better than the super-five, six types of electrical performance requirements of the system. Ø 24AWG cable (0.20 mm 7-strand cord) is made with a longer service life, resistance to bending, bending with a reasonable degree of security when using a cable. Ø a variety of colors, lengths, transfer type jumper, convenient various types of system environments. Ø arrived delay, at 100Mbps, 622Mbps ATM and Gigabit under not affect transmission. Ø Factory assembled modular patch security systems overall performance and greatly reduce errors in construction wiring. Ø Support EITA 568A / B universal linear order pin standard. Ø appearances before transmission performance through a comprehensive test FLUKE DSP-400 0 Series jumper test adapter jumper can work to ensure that the modular cabling environment in the next generation.

Features:      Balanced signals (LCL) control electromagnetic interference and also control the voice of influence;      Use high-quality material, ensure the same performance for 25 years;      Maximize bandwidth and ACR margin, to meet the "Key Tasks" applications, or adapt voice environment;      Transmission parameters optimized balance to apply to synchronous parallel transmission protocol;      Consistency insulation provides lower propagation delay skew;

product description:        Suitable for connecting subsystem level. Connection insulation consistency, provide very low propagation delay, small diameter size, reduce distortions installation cable. Using four pairs of single-strand hard copper wire, high-density polyethylene material color-coded insulator. With 4 pairs and 25 pairs, five and over unshielded and other specifications are available. UTP cable | UTP | UTP twisted pair technology index test items test results delay (ns / m) 5.02 Impedance (Ohm) 107 - 111 Return Loss

product description:      Wire conductors with four pairs of 0.5mm (24AWG) single bare copper wire or four pairs of multi-stranded copper wire (copper wire is insulated with PE material). With Mylar tape, aluminum foil Mylar tape shield together on the ground after being outside bet. Outside it is to comply with UL94V-0 flame retardant PVC material.      Comply with TIA / EIA568-B performance requirements.