H3C S5120-28P-SI
Network equipment
The main parameters
Product Type Smart Switch
Application-level floor
Transfer rate 1000Mbps
Exchange stored - Forward
- Product description
The main parameters
Product Type Smart Switch
Application-level floor
Transfer rate 1000Mbps
Exchange stored - Forward
256Gbps backplane bandwidth
Packet forwarding rate 51Mpps
Port parameters
Port structure of non-modular
Number of Ports 28
Port Description 24 10/100 / 1000Base-T Ethernet ports, four 1000Base-X SFP Gigabit Ethernet ports
Control Port 1 Console port
It supports full-duplex transmission mode
Features
VLAN support port-based VLAN (4K months)
QOS support IEEE 802.1p / DSCP Priority
Priority Mapping Support
Support port trust mode
Support port trust mode
Support port queue scheduling (SP / WRR / SP + WRR)
Multicast support IGMP Snoopingv123
MLD Snooping
Multicast VLAN support
Network management support XModem / FTP / TFTP load upgrade
Support command line interface (CLI), Telnet, Console port configuration
Support SNMP, WEB NM
Support RMON (Remote Monitoring)
Support iMC Intelligent Management Center
Support system log, grading alarms, and debugging information output
Support HGMPv2
Distal support Modem Dial
Support NTP
Support Ping, Tracert
Support Telnet remote maintenance
Support VCT (Virtual Cable Test) cable detection function
Support Loopback-detection port loopback detection
Security management supports user management and password protection support Radius authentication support SSH 2.0 support 802.1X, centralized MAC address authentication supports Guest VLAN support port isolation Support Security Support MAC address learning limit port supports IP source address protection support ARP intrusion detection support IP + MAC + port binding support EAD support Triple certification Correction
Other parameters
Supply voltage AC 100-240V, 50-60Hz
Product Size 440 × 160 × 43.6mm
Product weight <3kg
Environmental Standard Operating Temperature: 0-45 ℃
Humidity: 10% -90% (non-condensing)